How to open a new safe (cabinet)? Want to learn more about the knowledge of the safe, all in the Chinese safe exchange network. Wash Basin For Bathroom,Kids Sink Toilet,Kids Toilet For Bathroom,Bath Basin Sink Pinghu Relax Sanitary Ware CO.,ltd , https://www.relaxsanitary.com
Answer: The newly purchased electronic lock safe (cabinet) has 4 keys. Two keys and one manual were attached to the door, and two other keys were placed in the safe. Remove the two keys on the door According to the operation diagram in the manual, insert the big key into the main key hole, push the battery box cover to the right, pull out the 5th battery box and insert the small key, both keys turn right After opening the door. Remove the 2 small keys and 4 AA batteries and follow the instructions.
2. How to change the password?
Answer: Open the safe to find the number change button behind the cover, press the escape button by hand to enter the new password when the green light is on, and then press the * key to confirm that the green light is off. Enter the new password Press # to exit.
3, the new purchase safe key can also turn but why can not open the door?
Answer: Because the new safe is shipped from the factory in order to protect the paint on the door, there is a protective carpet on the lower left corner. When the key is turned to the open position, please pull the big key handle to the left and pull the carpet out.
4. After the battery is replaced, why is the green light still on?
Answer: There are two possibilities. One is that the customer's battery or battery is not enough. Solution: Replace the battery that meets the standard. Secondly, you may press the password before turning the key to the right when inserting the key. The main electromagnet of the locking chuck card causes the key to turn out of position. Solution Insert a large key flat in a large key, enter a large key, and enter the password. Turn the key in the green light to open the safe door.
5, open the password operation is also correct why the safe can not open?
Answer: There may be many reasons for password shifting, such as password shifting. For example, the root ring password has not been set at a good position, and the gun pin looses. First, add or subtract one digit from the resource password, and add the first password to the first group. One, the second group minus one, and the third group plus one. In the original password, the first group is reduced by one, the second group is added one, and the third group is reduced by one. If you can't open it again, please make a record and provide after-sales service personnel on-site service.