In life, many electrical appliances cannot be installed due to many reasons. In order to avoid such problems, pipelines should be buried in advance for the home appliance during the renovation process. The following is a small series and everyone together to find out how the appliance line should be laid out. Nine strokes let you learn appliance layout 1, microwave ovens, refrigerators reserve a separate line The input power of the refrigerator and microwave oven is large, which requires that its power cord must be used alone. Separate lines must be reserved before renovation. At the same time, the placement of the pipeline must be kept away from the gas stove to avoid contact between the pipeline and the heat source. 2, air conditioning paint before drilling a good air conditioning hole Before painting the wall, we must set the brand and model of the air-conditioner so that the air-conditioning installer can drill the air-conditioner hole first, and at the same time, the hooks of the indoor unit are all installed so that the decoration effect will not be affected. The location of the outlet must also be determined in advance, preferably near the air conditioning, and it is a separate outlet that is used separately from other appliances. Its input power is about 700 watts and 1500 watts, so only 10 amps of sockets are needed. However, if a high-power cabinet is added, professional outlets must be selected. 3, sound before laying a good line Whether you want a sound system or not, you'd better build the line before laying the floor. AV, video, and speaker cables must be given their respective locations in advance. Once you forget about the wiring, you will buy stereos in the future. The various types of lines that you can connect to will only go on the ground, which will affect the appearance. 4, washing machine reserved drainage, water inlet Unless the developer has established a drainage channel, it is necessary to lay the hole in advance during the renovation. At the same time, the power supply of the socket should be installed in a dry place. If the washing machine is to be placed in the bathroom, the power of the washing machine should be 1.2 meters or more above the ground. The location of the power supply before the renovation must be determined. 5, Yuba ready to ventilate and take the tube Before installing the Yuba, ventilation and pipe should be taken into account. The Yuba should not be too close to the roof. Generally, the distance between the Yuba and the roof is between 15 cm and 20 cm. In order to keep the power supply away from the water and avoid the danger, the height of the Yuba should not be too close to the ground. 6, solar water heater water distribution in advance Before installing the solar water heater, the decoration company should distribute water and wiring in advance. According to the requirements of electricity safety, the household power cord must be prepared with a three-core wire, and the grounding wire should be effectively grounded. Microcomputer control should be allowed in the appropriate location of the residential bathroom. The installation position of the device, pay attention to the arrangement of the power line with the Sheung Shui solenoid valve and the connection with the roof control line and the pipeline. In order to ensure the amount of water output, users who live on the top floor are better equipped with superchargers. 7, instant electric water heater inspection home circuit Instant electric water heaters have features such as instant heat, time saving, safety, environmental protection, and exquisite beauty. However, to meet the needs of winter bathing, the maximum power of such products is generally not less than 6 kilowatts, and the best choice is 8 kilowatts. The above products. Therefore, a special line with a cross section of 4-6 mm2 is required to be embedded during the renovation. The high-end products on the market also have the advantages of concealed installation of pipelines. If the pipes and wires can be embedded in the decoration according to the requirements of the products, the overall appearance after installation is particularly refreshing and beautiful. 8, water purifier water pipe connected in place To install and use this type of product, it is necessary to reserve power and water at the installation location. If it is convenient to drink in the living room, it is necessary to take the water pipe to a predetermined position during the renovation. 9, flat-panel TV to leave cooling space The flat panel TV is light and thin and can be wall mounted. However, the TV body has a large amount of heat and requires a high heat dissipation condition. If no sufficient space for heat dissipation is provided, the TV may easily be damaged due to excessive temperature. So consumers must ask professionals to install. In addition, the TV background wall must have more outlets for the needs. The above is a brief introduction for Xiaobian. If you want to know more related information, please continue to pay attention to Qijia Consulting. More exciting consultation, please stay tuned. Wire Plug Wire Switch Wire Brand Wire Optional Wire
We can produce the lower-temperature Steel Pipe according to the ASTM A333 and ASME SA333 standards, and the and the production diameter from 8" to 48" in OD and wall thickness from 9.53 mm up to 140mm. We have been sold the GR.6 steel pipe about 20000 tons to date and the property of -45℃ impact value is about 100J, better than the standard`s requirements.
Yangzhou Chengde has the full capability to do every test in-house, from mechanical testing, chemical analysis, PMI, UT/Hydrotest etc. Chengde`s lab is qualified to ISO 17025 and CNAS standard, being proven the repeatability of accurate testings.
Each alloy pipe is subject to PMI before dispatch. The INNOV-X system performs non-destructive chemical analysis via simultaneous detection and quantification of fluorescent x-rays of multiple elements in test sample.
Stainless Steel Tubing,Asme Sa333 Pipe,A333 Grade 6 Pipe,Carbon Pipe YANGZHOU CHENGDE STEEL PIPE CO.,LTD , https://www.chengdepipe.com
