A large inventory, toilet tank maintenance method summary!

Once a problem arises in the toilet, it can be a very tricky, irritating thing. The general problem with toilets is that, in addition to the blockage, there is usually a malfunction on the toilet tank. What are the common problems with the current toilet tank? How is the specific repair method? The following small series will introduce the user to the toilet tank maintenance method.

First, the toilet tank maintenance - leaking water tank

1. Open the lid of the tank first and observe the inside of the tank under the condition that the water has been filled. What kind of position the water scoop is in? If the water inside the tank is full and the tank is still flooding, then the tank is bound to leak. At this time, the fault appeared on the water scoop. The water scoop can be replaced or repaired, and it is better to lower the position of the scoop.

2. If there is a problem with the water scoop, then check the outside of the water tank. There is a stainless steel hose connection on the outside of the water tank. Generally, the water in the water tank enters the water tank from here. Check whether it is damaged or not tightened. After that, it will be targeted for maintenance.

3. In addition to these two possibilities, it is also possible that the water tank has been hit by an external force, causing a problem of damage to the tank, resulting in leakage of the tank. If you encounter this situation, you must quickly repair the tank cracks. If there is a slight crack, you can use some special glue to repair the water tank, but if the crack is too large, you can only ask a professional to repair or replace it.

Second, the toilet tank maintenance - the water tank is not water

1, the toilet tank does not enter the water, may be tap water pressure is not big enough.

2. Check if the filter of the inlet valve is blocked by the filtered debris. If so, simply remove the debris. In the future, I will clean up the filters periodically.

3. In addition, check whether the seal inside the water valve body has fallen off or there is mud and sand. If the seal is detached, reinstall it and remove the debris.

Third, toilet tank maintenance - water tank ball plug

Check the water tank ball plug of the flush valve. Sometimes the chemical residue in the water may sometimes make the ball plug unable to move to the proper orientation, or the ball plug itself is decaying and the water will seep through the opening of the flush valve. Go to the tank below. Close the flush valve of the flush toilet and flush it to empty the tank. Check that the water tank ball plug is not worn and that a new ball plug can be fitted if necessary.

The article concludes: The above introduced the relevant knowledge of the toilet tank maintenance . The water tank is one of the most important components of the toilet. Once a problem arises, it is a headache. After learning this article, you can solve the same problems by yourself. I hope that the method introduced by Xiao Bian can help everyone.

Toilet seat toilet toilet broken repair toilet

Types : Weld neck Flanges (WNRF), Slip-on Flanges (SORF), Blind Flanges (BLRF), Lap Joint Flanges (SOLJ), Socket-weld Flanges (SWRF), Screwed (Threaded) Flanges, Long weld neck Flanges (LWNRF), Spectacle Blind Flanges Spacer & Blind Flanges, Ring Type Joint Flanges (RTJ), Reducing Flanges, Raised Face (RF) Flanges, Orifice Flanges, Large Diameter Flanges, Custom Flanges, Drawing Flanges, Forged Flanges, Plate Flanges, Flat Face Flanges, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, API, EN Flanges etc.

ANSI/ASME B16.5, B 16.47 SS Flanges, Stainless Steel 304, 316, 316L Slip On Flanges, Stainless Steel 310, 310S, 446 Blind Flanges, SS Forged Flanges, Steel Orifice Flanges, SS Reducing Flanges  

Stainless Steel Flange

Stainless Steel Flange,Stainless Flange ,Stainless Steel Pipe Flange,Steel Pipe Flange

Zhejiang Max Stainless Steel Co.,Ltd , https://www.cnstainlesstube.com