The rapid development of modern science and technology and production raises ever-increasing demands on the floor of workshops and workshops. For workshop floor corrosion, cleanliness and wear resistance, indoor air dust content as low as possible, this is not only to improve the working conditions of the needs, but also the guarantee of product quality; and because the floor is often subject to friction and easy accumulation of a large number of static charges, Obstructs production operations, interferes with precision instrument work and affects the accuracy of product processing, and even causes fire, explosion, and other accidents. Then, the next Xiaobian for everyone to introduce what is the anti-static floor and anti-static floor coating construction precautions. What is an anti-static floor? For the anti-static floor, the anti-static property of the coating should be considered firstly. Secondly, there is the compressive strength, tensile strength and wear resistance, as well as the usual chemical resistance. Therefore, in the formula design, epoxy resin is basically selected as the base material, and conductive materials, fillers, solvents, and additives are added to make antistatic floor coatings. Anti-static floor coating construction precautions 1. Plan and Arrangement Before construction, according to the pre-divided construction technology, prepare all the people, machines and materials in advance. 2, floor paint materials The two-component coating must be mixed strictly according to the proportion, and less than one barrel can accurately weigh the two components A and B according to the ratio using the electronic scale. The mixing time of the two-component mixing is generally 3 minutes. Before the mixing, the coating components must be stirred first, and the agglomerates must be filtered first. 3, construction and cooperation During the construction process, attention should be paid to the clear division of labor and close coordination of the operators. Feeding and pouring should be done in an orderly way. The application of scraping and defoaming should be timely and the procedures should be as close as possible. In order to ensure that the self-leveling coating fluidity is not lost, to avoid obvious after curing, rubbish and defoaming should be careful, protection and edge of the staff must first walk, so as not to affect a large area of ​​scraping quality. The self-flowing flat paints mainly rely on their fluidity to ensure uniform thickness and consistent perception, and reduce the number of defects. The construction details should be arranged as far as possible to achieve this goal. 4, the border processing The construction boundary must be handled in a timely manner. After the construction is completed, special personnel should be assigned to guard against pollution. It is best to survive once and try to avoid repairs. Editor's summary: What are the precautions for the construction of anti-static flooring and anti-static floor coatings are introduced here, and I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information. Floor House Decoration Precautions Construction Installation Home Decoration Precautions Decoration Precautions Dial Indicator,Dial Test Indicator,Dial Gauge,Digital Dial Gauge Changzhou Longfu Knitting Co., Ltd. , https://www.czcircularmachine.com
