Woven Fence are weaved by galanized Wire , PVC wire or Stainless steel wire.
The woven fence contains Chain link fence, Field fence , Gabion , Bullet-Proof Mesh
1. Chain Link Fence is extensively used as fences for playground and gardens, super highway, railway, airport, port, residence, etc. Also can be used for breeding of animals.
Chain link fence can be with barb wire, Razor Wire on top for high security.
2. Field Fence also called Grassland garden mesh(Hinge Joint Fence) usually made from hot dip galvanized wire with zinc coating of 230g/m2.
Top and bottom wire: 2.5mm
inner wire: 2.0mm
3. Gabion Basket made of hexagonal Galvanized/PVC/Zinc-Al double twised mild steel wire mesh.
Gabion baskets can be supplied in various lengths, widths and heights. In order to strengthen the baskets, all the edges of the structure shall be selvedged thicker wire diameter.
4. Bullet-proof mesh is the most popular as window screen. It made of stainless steel wire and powder coating.
The Bullet-proof mesh transparent without any sense of vertigo, it is like a layer of transparent colored glass when looked from inside to the outside of the rom and hazy and blurred from outside to the inside of the room.
Woven Fence Chain Link Fence,Field Fence,Bullet-Proof Mesh,Woven Fence Anping Deming Metal Net Co.,Ltd , https://www.wovenfence.nl
Slide valve vacuum pump working principle and structure
Sliding valve vacuum pumps, which function to remove specific gases or contain small amounts of condensable vapors, are nowadays widely used in vacuum smelting, vacuum drying, vacuum impregnation and other vacuum operations. Sliding valve vacuum pump principle is to use the slide valve body to change the suction chamber volume, so called slide valve pump. Sliding valve vacuum pump working principle and structure Sliding valve vacuum pump working principle: Sliding valve vacuum pump mainly by the pump body and the eccentric rotation of the spool, semi-circular slide valve guide, exhaust valve, shaft and other components (See picture). The pump body is equipped with a slide valve ring (4), an eccentric wheel (3) is arranged in the slide valve ring, the eccentric wheel is fixed on the shaft (2), and the axis coincides with the center line of the pump body. The slide valve ring is provided with a rectangular slide valve stem (5), which can slide up and down and swing left and right in the semicircular slide valve guide (7). Therefore, the pump chamber is separated into the valve slide rings A and B Two rooms. Pump in operation, due to the cyclical changes in the volume of A, B two chamber, so that the evacuated gas into the gradually increasing volume of the suction chamber; the same time, in the exhaust chamber with its reduced volume and gas compression , And out of the pump through the exhaust valve. Two-stage type of slide valve pump, in fact, by two single-stage pump in series. Its high and low vacuum chamber in the same pump body, some are cast directly into a whole, some are pressed into the partition into the pump chamber into high and low two rooms. Sliding valve vacuum pump because of its structural characteristics, generally divided into single-stage pump and two-stage pump two, but there are vertical and horizontal structure of two types. With the development of science and technology, the slide valve mechanical vacuum pump has also been greatly reformed, and its use is also more easy to use and convenient. Further study of its working principle will be beneficial to the improvement and improvement of related technologies. Related articles: Sliding valve vacuum pump schematic diagram Sliding valve vacuum pump working principle