After the home is renovated, all kinds of furniture are placed at home, and it is very important to pay attention to the protection of the floor and the legs of the tables and chairs. Put the foot cover on the table and chair foot! Affordable and beautify the home. Creative tables and chairs booties production method is what does? With the view of go good home network Xiaobian summary diy home-made tables and chairs shackle sets of steps. Diy homemade table and chair foot cover step 1. preparation The materials for the preparation of the table and chair cover are cloth, elastic band, leather pad (or thick cloth), cotton (or sponge, silk cotton, etc.). The tools to be prepared are of course scissors, needles, tapes, etc. Diy table and chair foot cover step 2. cut cloth After measuring the circumference of the table and chair with a soft ruler, you can cut it by hand. Use a pair of scissors to cut a piece of cloth into a circle that is large enough to wrap the table and chair legs, and to leave more of the back side of the bread. Then use another color of cloth to cut into two strips, as the fabric for the underside and the ribbon for the season. The size of the leather pad is the same as the size of the sole of the table and chair, so you can leave a little more. Diy homemade table and chair foot cover 3. sewing cloth The first is to wrap the round piece of cloth with a strip of cloth, and then sew the pad to the center of the cloth. Then you can sew the elastic band at the position of two-thirds of the round cloth. Note that the elastic band should not be too loose or too tight. The maximum circumference of the elastic band can be equal to the circumference of the table and chair foot. Diy homemade table and chair foot cover step 4. end The end job is to evenly distribute the previously prepared cotton into the foot cover of the table and chair, and then tie the previously prepared belt to a bow outside the cuff. The production of the table and chair foot cover is done. Creative table and chair foot cover production points: Of course, in addition to using cloth as a material, we can also choose materials such as wool and plush. Choosing a wool can be done by knitting. Of course, you don't have to knit. It's also a tricky way to use the already woven wool stitching in a similar way to the one above. This is both simple and adds a lot of warmth to the home. There is also a way to add romance to the table and chair sets, that is, to add the lace edge to the outer side of the cloth, or to make a wave shape, which is not enough romantic? The production of the table and chair cover is also very important. The point is that the style should match the decoration style in your home. The best way is to choose a style material similar to tablecloths, curtains, etc. The above is the DIY homemade table and chair foot cover steps, more exciting information, please pay more attention to the good home network, go Jiaju.com will edit the report for you, so stay tuned. kaiping aida sanitary ware technology co.,ltd , https://www.kpaidafaucets-jm.com