High Resistance Alloy is used to produce resistance elementof conductive material.Requirements including High mechanical strength, good corrosion resistance and oxidation resistance. Working temperature is usually at500 ℃. Commonly used with constantan chromium iron, iron chromium aluminum, nickel chromium, nickel, resistivity rho (20 ℃) is 1 Ω was/m or so. It is not used in the conduction of current, but with its high resistance to limit or control the current in the circuit, such as motor, potentiometer, standard resistors, potentiometers, slip line resistor resistance element and resistance line, etc.; For the using of high resistance in the pressure sensor,Temperature compensator and temperature measuring resistor of resistance element to creatte reflect strain, temperature, magnetic field and parameters; High resistance alloy can also be used as heating elements in the manufacture of the resistance heating equipment, could be applied in current, voltage regulating and the winding of control components. Resistance Electrothermal Alloy Resistance Alloy,Corrosion Resistant Alloy,Resistance Electrothermal Alloy,Fecral Resistance Heating Alloys Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com
The revolution in the waste plastics industry needs to undergo six revolutionary transformations
Some waste plastics have been buried for many years and cannot be degraded, while others are sent to incineration plants for incineration to produce waste gas. Therefore, in people's consciousness, waste plastics pollute the environment, and waste plastics enterprises are classified as “small pollutionâ€. In fact, the waste plastics industry contains too many misunderstandings. Over the years, people in the waste plastics industry have turned the mineral resources mined on the earth into new resources, prolonging the life of plastics for human services, and objectively protecting the environment. Therefore, the waste plastics industry should be a An industry that everyone respects. So how do you implement industry changes from “misunderstood†to “respectedâ€?
Vigorously promote the new model of "Internet +", promote the penetration and application of big data and information technology in the plastics industry chain, and transform and transform the trading market from offline to online and offline to realize intelligent logistics between upstream and downstream enterprises. Through information technology, optimize resources, reduce intermediate links in the industry, improve efficiency, and reduce operating costs. Enterprises should develop in the direction of informationization, automation and intelligence, and improve the plastic industry chain system.
Six revolutionary transformations in the waste plastics industry:
1. From "foreign garbage import" to "domestic waste separation and recycling"
2. From “Building a factory with the place†to “concentrating the parkâ€.
Originally, the waste plastics industry has one characteristic. It is a peasant guerrilla group. Some small processing plants are scattered and built. The cost of environmental treatment is relatively high, and the country is also difficult to supervise. Therefore, we have to move from a local factory to a centralized park.
3. From "low and small" to "group, scale"
The higher the scale of the industry, the stronger the profitability of the company, and our contribution to the environment is growing.
4. Extending from "material processing" to "product production"
From the original acquisition of waste plastics cleaning and processing to the final product, many companies can now produce high-end products.
5. From "labor-intensive" to "smart manufacturing"
From manual sorting and cleaning to smart manufacturing, we need to find companies with advanced products, high technology and high modernization.
6. From producer to environmental integrated service provider.