Long before the furniture is ready to use, first look at the quality, then look at the maintenance, no matter how good the furniture is not maintained, it will be prone to cracking, lacquer shedding, especially in the fall and winter season, air humidity is low, furniture is more prone to cracking Tendency, therefore, the maintenance of furniture is particularly important, so in the cold and dry season, what measures do we take to avoid furniture damage? First, avoid direct sunlight Although the autumn sun is not as violent as summer, it can easily cause cracks in wooden furniture when exposed to prolonged exposure. If some furniture is easy to move, Xiaobian recommends that it be best placed in a place where sunlight cannot reach directly. Nowadays, people's living standards have increased and they are too petulant when buying furniture. I would like to tell everyone here that the wind in the fall will be relatively large. We can easily fly into the house when we open the window for ventilation. Therefore, the self-possessed owners are required to clean their home from time to time. If they continue to accumulate for a long time, these dusts are “long†on these individual furniture, and it is very difficult to clean them up when they are cleaned. Affects the overall aesthetics of the furniture. Second, regular maintenance of solid wood furniture Solid wood furniture is coated with paint, so its maintenance is very important. If the film once fell off will not only affect the appearance of furniture, but also affect its practicality, so home owners who bought solid wood furniture must be regularly maintained. Then we must pay attention to the selection of waxing products. Do not use inferior products that contain chemical corrosion components, otherwise it will have the opposite effect. If we are using cleaners, it is recommended not to use oily ones as this will cause whitening on the furniture surface. I hereby advise everyone to adopt the former method of care. Third, do not wipe with a damp cloth Most homeowners use a semi-dry or wet rag to wipe furniture directly for convenience. In fact, whether it is for wood, leather, or metal furniture, this maintenance method is wrong. Because blindly wipe with a wet rag, although the furniture surface does not seem to dust, but the actual paint on the furniture will gradually become dull, or will affect the appearance. Therefore, if the furniture becomes bright and shiny, we must pay attention to the late maintenance. Under normal circumstances, the owners of leather furniture at home, it is recommended that the best removal of dust on the surface after the maintenance of a special leather oil or sheep oil, because it will not only soften the cortex, but also moisture and mildew. Metal furniture should be scrubbed with a mild detergent. Try not to use it in a wet environment. Pay attention to waterproof and moisture. If you accidentally get water on it, clean it with a dry cloth immediately. Home Maintenance Furniture Maintenance
Light
steel stud Roll Forming Machine
The products made by light steel stud
roll forming machine
are suitable to use as building decorations,
especially suitable to use in bedroom, kitchen, washroom, corridor and so on.
The components of light steel stud
roll forming machine:
1. Steel strip supporting frame
2. Feeding platform
3. Automatic shearing system
4. Hydraulic system
5. Steel strip unfolding system
6. Computer control system (imported
computer)
7. High-precision automatic counter
8. Receiving table
Advantage of light steel stud roll
forming machine:
Low cost
High efficiency
low energy consumption
Description
of Light Steel Stud Roll Forming Machine:
Thickness
of material: 0.3-0.8mm
Main
structure:8-25mm
Wall
plate: Welded steel, arch frame body
Diameter
of shaft: Ф50 solid
Bear:
6210
Gear:
Gear drive
Electric
motor power: 5.5KW
Reducer:
5# cycloid reducer
Roller:
12rows
Forming
speed: 8-12m/min
Material
of Rollers: Gcr12
Cutting
type: Hydraulic shearing
Motor:
380V, 50HZ/3 phase
Electrical
part:CHINT,Delixi
Hydraulic
motor: 4KW
Tail
cutting material: Delta PLC-14ES
Size
of machine: 5.5m*0.7m*1.2m
Warranty: 12 months
limited warranty
Delivery: 30 days after receipt of advance
payment
Package:
Plastic packing and nude in the container
Payment
Term: T/T, L/C, Trade assurance
Light Steel Stud Roll Forming Machine Light Steel Stud Roll Forming Machine,Keel Light Roll Forming Machine,Light Steel Roll Forming Machine,Galvanized Light Steel Stud Roll Forming Machine Shijiazhuang Zhouming Steel Building Materials Co., Ltd. , https://www.zmsteels.com
How much winter furniture maintenance do you do not know?
1 2 Next> Total 2 Page
Page to page